Product Features
· 75×75mm wing size — the widest standard 90° corner coverage in the CG Series (note: product is marketed as "70mm" but actual wing dimension is 75×75mm — confirm with sales for project specification documents)
· Aluminum-reinforced PVC cover — heavy-duty 6063-T5 aluminum retainer beneath a 2.0mm rigid PVC surface
· Resistant to impact, bacteria, fire, and moisture
· Easy surface-mounted (drilled) installation with long-lasting performance
· ASTM E84 Class A fire rating for enhanced safety compliance
· White standard, 100+ customizable colors
· 3000mm standard length; 1m/1.5m/2m custom lengths available
Product Specifications
| Model | CG-70B Corner Guard – Aluminum Reinforced |
| Type | Hard Corner Guard |
| Wing size | 75mm × 75mm (3" × 3") |
| Angle | 90° |
| Length | 3000mm per section (standard); 1m / 1.5m / 2m customizable |
| Material | Rigid PVC (vinyl) cover + 6063-T5 aluminum retainer |
| PVC thickness | 2.0mm |
| Aluminum thickness | 1.8mm |
| Color options | White (default), 100+ customizable colors |
| Fire rating | ASTM E84 Class A |
| Installation | Surface-mounted, drilling |
| Applications | Hospitals, schools, kindergartens, nursing homes, hotels, public buildings |
| Features | Impact-resistant, antibacterial, flame-retardant, waterproof, easy to maintain |
| Packaging | 3m/section, standard export packaging |
| MOQ | By linear metre |
Applications
· Main hospital corridor corners — the highest-traffic corners in a facility, regularly contacted by hospital beds, large carts and continuous wheelchair circulation
· Emergency department and equipment transit route corners — corners subject to the most frequent and severe impact across a hospital's full footprint
· Schools and kindergartens — high-energy corridor corners exposed to constant child traffic
· Hotel corridors and public area corners — premium-traffic commercial corners requiring durable, presentable protection
· Renovation and new-build projects requiring formal fire compliance documentation — ASTM E84 Class A certification supports specification compliance
Installation Steps
1. Determine the full corner protection height — typically coordinated with the facility's overall wall protection scheme (matching HR Series handrail or WG Series wall guard heights where specified together).
2. Mark fixing positions along both wings at the recommended spacing (typically every 300-400mm), confirming structural wall substrate at every position.
3. Drill pilot holes appropriate to the wall substrate (masonry, concrete, or timber stud) at each marked position.
4. Insert wall anchors suitable for the substrate type — stainless steel anchors are recommended for wet-area or high-humidity installations.
5. Position the CG-70B section over the corner, aligning both wings flush with the adjoining walls.
6. Drive screws through the pre-drilled fixing points into the wall anchors, securing the aluminum retainer firmly in place along the full length.
7. Fit end caps and top closures at the start and end of each run.
8. Apply a firm load test along the installed corner guard before the area is returned to use.
Product Advantages
· Maximum wing coverage in the standard 90° range — at 75×75mm, CG-70B protects more of the vulnerable corner zone than any other PVC/aluminum model in the CG Series
· Heaviest-duty construction available in PVC/aluminum format — the combination of full wing width and 1.8mm aluminum reinforcement makes CG-70B the recommended specification for the single highest-traffic corner location in a project
· ASTM E84 Class A documentation — supports formal fire compliance requirements in specification-driven healthcare and public building projects
FAQ
Q: The model is called "CG-70B" but the wing size is listed as 75×75mm — which is correct?
A: Both are correct — "70mm" in the product name refers to the general size class within the CG Series naming convention, while 75×75mm is the precise manufactured wing dimension. For project specification documents, drawings, and procurement paperwork, please use the precise 75×75mm dimension to avoid any discrepancy with architectural drawings.
Q: Is CG-70B the best choice for the single highest-traffic corner in my project?
A: Yes. Among the standard 90° PVC/aluminum corner guards in the CG Series, CG-70B offers the widest wing coverage and the same 1.8mm aluminum reinforcement as CG-50B, making it the recommended specification for main corridor corners, emergency department corners, and any location with the most frequent and severe impact in your facility.
Q: Can CG-70B be color-matched to an existing HR Series handrail installation?
A: Yes. With 100+ customizable colors available (white is the default), CG-70B can be matched to existing or newly specified HR Series handrails and WG Series wall guards for a coordinated wall protection system from a single supplier.
