Key Benefits
· Reliable hospital wall protection panel for healthcare facilities
· Antibacterial PVC wall sheet with hygienic performance
· Fire rated wall cladding panel with waterproof and stain-resistant surface
· Easy to install and maintain
· Suitable for hospitals, nursing homes, and clinics
Specification
Model | VS-10 Vinyl Wall Protection Sheet |
Type | 1.0mm hygienic PVC wall cladding |
Thickness | 1.0mm |
Standard Size | 1220 × 2440mm |
Material | Solid PVC (Vinyl) |
Surface Finish | Smooth, easy-clean |
Fire Rating | Class 1 (BS476) fire rated wall cladding panel |
Color Options | White (default), customizable |
Installation | Adhesive bonding / trims |
Application | Hospital vinyl wall protection sheets, nursing homes, healthcare wall cladding panels |
Features | Hygienic, antibacterial, waterproof, stain-resistant, easy to clean |
Applications· General hospital ward corridors — the standard entry-level specification for corridors with moderate, regular foot traffic and occasional equipment contact
· Nursing home hallways — durable, easy-clean wall surface for care facility corridors with wheelchair and walking aid traffic
· Outpatient clinic corridors — hygiene-critical areas with regular patient and staff circulation
· Consulting room and treatment room walls — areas requiring infection-control wall surfaces without the heaviest impact protection specification
· Healthcare facility renovation projects — a practical mid-tier specification balancing cost and durability for general ward upgrades
Installation Steps
1. Prepare the wall substrate — surface must be smooth, clean, dry and free from loose paint, grease or old adhesive residue.
2. Measure and cut panels to size using a sharp utility knife or fine-tooth saw, allowing for trim profiles at all edges and corners.
3. Dry-fit panels to confirm layout, panel orientation and trim positions before applying adhesive.
4. Apply panel adhesive evenly to the wall using a notched trowel, following the adhesive manufacturer's coverage rate.
5. Press the panel into position working from the centre outward to eliminate trapped air, maintaining consistent pressure across the full panel area.
6. Fit internal corner, external angle and joiner trims at all panel edges and wall junctions, color-matched to the panel for a seamless appearance.
7. Seal all trim joints with antibacterial silicone sealant to maintain the hygienic, bacteria-resistant performance of the complete system.
8. Allow adhesive to cure fully (typically 24 hours) before the wall is exposed to cleaning or contact.
Note: at 1.0mm thickness, panels are slightly more rigid than VS-08 — confirm cutting tools (utility knife blade sharpness, saw blade tooth count) are appropriate for the increased material thickness to achieve a clean edge finish at trim junctions.
Product Advantages· The practical default specification — VS-10 is the thickness most
commonly specified for standard hospital corridor and ward applications
where VS-08 would be under-specified and VS-15+ would exceed the
project's actual impact protection requirement
· Balanced cost-to-performance — provides a meaningful durability step
up from VS-08 without the additional material cost of the heavier-duty
VS-15/20/30 options
· Full standard size coverage — the 1220×2440mm standard sheet size
matches common healthcare corridor wall heights, minimising offcut waste
FAQQ: Is VS-10 sufficient for a busy hospital ward corridor with regular bed transport?
A: VS-10 is suitable for ward corridors with moderate traffic — typical patient and staff foot traffic plus occasional equipment contact. For corridors with frequent hospital bed transport, heavy cart traffic or wheelchair-intensive circulation, VS-15 or VS-20 provide greater impact resistance and are the more appropriate specification. As a general rule: if the corridor is a primary bed-transport route, specify VS-15 minimum.
Q: What is the practical difference in feel and durability between VS-08 and VS-10?
A: The 0.2mm thickness difference is modest but measurable in real-world performance — VS-10 has noticeably greater resistance to denting and puncture from sharp or pointed contact, and a more rigid feel underhand. For most projects, the choice between VS-08 and VS-10 comes down to the specific area's traffic level rather than a dramatic difference in appearance or installation method.
