Product Features
· Raised bar (corduroy) pattern — directional guidance TGSI in premium stainless steel
· SUS304 or SUS316L stainless steel
· One-piece pressed construction — full structural integrity across the tile surface
· Brushed, mirror or anti-fingerprint finish
· Textured bar surface — anti-slip performance along the direction of travel
· Corrosion and chemical resistant
· ADA, ASTM, EN and ISO compliant bar dimensions
· Standard 300×300mm panel; custom sizes available
· Permanent building-life service — designed to outlast the building without replacement
· Pairs with SSTP-00 dot pattern tile for a complete stainless steel TGSI system
Product Specifications
| Model | SSTP-01 |
| Pattern | Bar / Corduroy — directional guidance |
| Material | SUS304 or SUS316L stainless steel |
| Panel dimensions | 300 × 300 mm |
| Thickness | 3–5 mm |
| Bar height | Per ADA / AS/NZS / EN standard |
| Surface finish | Brushed / Mirror / Anti-fingerprint |
| Standards compliance | ADA / ASTM / EN / ISO / CSA |
| Installation methods | Mechanical anchor bolt / epoxy adhesive |
| Compatible substrates | Concrete, stone, tile, terrazzo, metal floor plates |
| MOQ | By m² / project quantity |
| Lead time | 15–20 business days |
Applications
· Subway and metro concourse guidance paths — continuous stainless steel guide paths from station entries to platforms, lifts and exits; permanent installation in the highest-traffic public buildings
· Airport terminal guidance paths — premium metal guidance paths through terminal buildings for visually impaired passengers
· Railway station interiors — high-specification guide paths through ticketing halls and station concourses
· High-specification hospital corridors — permanent stainless steel guidance paths for patient accessibility in flagship healthcare buildings
· Luxury hotel lobbies and corridors — brushed stainless guide path integrates with premium stone and marble floor finishes
· Government and civic building corridors — permanent accessible guidance paths in high-profile public buildings
Installation StepsSame 10-step process as SSTP-00 Installation Steps.
Key additional note for bar pattern:
· Bar orientation is critical — verify that bars in every tile run parallel to the direction of travel. Check alignment across every tile joint before adhesive cures. Once stainless steel tiles are set in epoxy, repositioning is not possible without demolition.
· At direction changes and junctions with SSTP-00 dot warning zones, ensure flush tile-to-tile transitions and consistent joint width throughout the installation.
Product Advantages· Complete permanent stainless steel TGSI system — SSTP-01 + SSTP-00 creates a full building-life guidance and warning system; specified for the most prestigious transit and institutional projects globally
· Consistent system finish — SSTP-01 bar and SSTP-00 dot tiles share identical material, thickness and finish specifications; seamless visual integration across the complete TGSI installation
· Premium guide path aesthetic — brushed stainless bar path provides a defined, premium visual guide route through high-specification interior environments
FAQQ: Can I mix SSTP-00 and SSTP-01 tiles in the same stainless steel TGSI installation?
A: Yes — and this is the standard installation layout. SSTP-00 dot tiles mark hazard warning zones; SSTP-01 bar tiles create the connecting guidance paths. The tiles share identical 300×300mm dimensions, the same material specification and the same surface finish options, ensuring a visually consistent installation.
Q: Does the bar orientation need to be checked at every tile?
A: Yes. This is the most important quality check in bar tile installation. Bars must run continuously parallel to the direction of travel, aligned across every tile joint. A misaligned tile mid-path breaks the tactile reading for a cane user. Check alignment at every tile placement and before the adhesive begins to cure.
