Key Benefits
· Heavy-duty vinyl wall protection sheet for demanding environments
· Antimicrobial PVC wall cladding with waterproof and chemical-resistant features
· Fire-rated and hygienic, suitable for food and healthcare industries
· Decorative finishes available for aesthetic integration
· Ideal for commercial kitchen PVC wall cladding, laboratory wall protection panels, cleanroom wall protection
Specification
Model | VS-20 Vinyl Wall Protection Sheet |
Type | 2.0mm hygienic PVC wall cladding |
Thickness | 2.0mm |
Standard Size | 1220 × 3000mm |
Material | Antibacterial Solid PVC |
Surface Finish | Satin / Matte / Decorative |
Fire Rating | Class 0 Fire Rated fire resistant wall sheet |
Color Options | White, wood grain, stone finishes |
Installation | Adhesive bonding with sealant |
Application | Commercial kitchen PVC wall cladding, cleanroom hygienic wall panels, laboratory wall protection, hospital vinyl wall protection sheets |
Features | Impact-resistant, antimicrobial, waterproof, fire-rated, chemical-resistant |
Applications· A&E and emergency department corridors — high-traffic, high-impact areas requiring maximum hygiene and durability in healthcare's busiest circulation zones
· Commercial kitchen walls — HACCP-compliant hygienic wall surfaces for food preparation areas, resistant to grease, steam and frequent high-temperature cleaning
· Cleanroom wall panels — non-porous, seamless surfaces meeting the particulate and microbial control requirements of pharmaceutical and electronics cleanroom environments
· Laboratory wall protection — chemical-resistant wall surfaces for research and diagnostic laboratory environments with regular exposure to reagents and cleaning solvents
· Food processing facility walls — durable, washable wall cladding meeting food safety hygiene standards for processing and packing areas
· Busy hospital ward entrances and main thoroughfares — the highest-traffic healthcare corridor zones where bed transport and equipment movement is most frequent
Installation Steps
1. Prepare the wall substrate — surface must be smooth, clean, dry and free from loose paint, grease or old adhesive residue.
2. Measure and cut panels to size using a sharp utility knife or fine-tooth saw, allowing for trim profiles at all edges and corners.
3. Dry-fit panels to confirm layout, panel orientation and trim positions before applying adhesive.
4. Apply panel adhesive evenly to the wall using a notched trowel, following the adhesive manufacturer's coverage rate.
5. Press the panel into position working from the centre outward to eliminate trapped air, maintaining consistent pressure across the full panel area.
6. Fit internal corner, external angle and joiner trims at all panel edges and wall junctions, color-matched to the panel for a seamless appearance.
7. Seal all trim joints with antibacterial silicone sealant to maintain the hygienic, bacteria-resistant performance of the complete system.
8. Allow adhesive to cure fully (typically 24 hours) before the wall is exposed to cleaning or contact.
Additional note: VS-20's decorative finish options (wood grain, stone effect) require careful panel orientation matching at seams — confirm grain/pattern direction before cutting panels to ensure a consistent visual match across the installed wall surface.
Product Advantages· Cross-industry hygiene specification — VS-20 meets the demands of food processing, cleanroom and laboratory environments in addition to healthcare, making it a versatile single specification for mixed-use
facility projects (e.g., hospitals with on-site catering or laboratory departments)
· Class 0 fire rating — the highest fire performance classification in the VS Series range, appropriate for the most safety-critical specification requirements
· Decorative finish options — wood grain and stone effect finishes allow VS-20 to serve dual hygiene-and-aesthetic requirements in reception areas and patient-facing spaces, not only purely functional back-of-house
applications
FAQQ: Is VS-20 overkill for a standard hospital corridor, or should I use it everywhere for maximum protection?
A: VS-20 is the right specification for the highest-traffic and highest-risk areas — A&E, main thoroughfares, kitchens, cleanrooms and laboratories. For standard ward corridors and lower-traffic clinical areas, VS-10 or
VS-15 provide adequate protection at a lower material cost. Specifying VS-20 throughout an entire facility is not cost-efficient — match the thickness to the actual traffic and impact risk profile of each area.
Q: Can VS-20 be used in food processing facilities under HACCP requirements?
A: VS-20's smooth, non-porous, chemical-resistant surface is designed to support HACCP compliance requirements for food contact area wall surfaces. Specific certification requirements vary by jurisdiction and
facility type — confirm your local food safety authority's specific documentation requirements, and we can provide relevant test certificates and material composition data to support your compliance submission.
