Product Features
· 50×50mm 90° angle wing size — standard square-corner coverage
· PVC surface + 6063-T5 aluminum retainer — structural reinforcement beneath a rigid, hygienic outer cover
· 2.0mm PVC thickness / 1.8mm aluminum thickness — substantial material specification for long-term durability
· Drilled, surface-mounted installation — secure mechanical fixing for sustained high-impact environments
· ASTM E84 Class A fire rating — meets stringent fire safety requirements for healthcare and public buildings
· Resistant to impact, fire, moisture and bacteria
· 100+ customizable colors (white standard)
· 3000mm standard length; 1m/1.5m/2m custom lengths available
Product Specifications
| Model | CG-50B Corner Guard – Aluminum Reinforced |
| Type | Hard Corner Guard |
| Wing size | 50mm × 50mm (2" × 2") |
| Angle | 90° |
| Length | 3000mm per section (standard); 1m / 1.5m / 2m customizable |
| Material | Vinyl (PVC) cover + 6063-T5 aluminum retainer |
| PVC thickness | 2.0mm |
| Aluminum thickness | 1.8mm |
| Color options | White (default), 100+ customizable colors |
| Fire rating | ASTM E84 Class A |
| Installation | Surface-mounted (drilled) |
| Applications | Hospitals, schools, kindergartens, nursing homes, public facilities |
| Features | Impact-resistant, antibacterial, waterproof, flame-retardant, easy to clean |
| Packaging | 3m/section, standard export packaging |
| MOQ | By linear metre |
Applications· High-traffic hospital corridor corners — standard 90° corners subject to continuous wheelchair, cart and stretcher contact
· School and kindergarten corridor corners — corners exposed to high-energy child traffic where structural durability matters more than rapid installation
· Nursing home and rehabilitation center corners — corners along mobility-equipment routes requiring sustained protection over years of use
· Public building corridors — government buildings, transit facilities and commercial premises with continuous foot and equipment traffic
· Renovation projects where wall penetration is acceptable and maximum durability is the priority over installation speed
Installation Steps1. Determine the full height of corner to be protected — typically from floor level to a height matching the facility's wall protection scheme (often coordinated with HR Series handrail or WG Series wall guard heights).
2. Mark fixing screw positions along both wings of the corner guard at the manufacturer-recommended spacing (typically every 300-400mm).
3. Confirm structural wall substrate at all marked fixing positions — solid masonry, concrete or timber stud backing is required for secure screw fixing.
4. Drill pilot holes at each marked position using a masonry or timber bit appropriate to the substrate, sized for the fixing screw.
5. Insert appropriate wall anchors for your substrate type.
6. Position the CG-50B section over the corner, aligning both wings flush with the adjoining wall surfaces.
7. Drive countersunk screws through the pre-drilled fixing points in the PVC cover into the wall anchors, securing the aluminum retainer firmly against the corner.
8. Fit any end caps or top closures supplied with the order at the top and bottom of each run.
9. Apply a firm load test along the installed length before the corner is returned to use.
Product Advantages· Structural fixing for sustained impact resistance — the drilled aluminum core provides mechanical security that outperforms adhesive-only mounting in continuous high-traffic environments
· ASTM E84 Class A fire performance — a recognized international fire safety standard, useful for projects requiring formal fire compliance documentation
· Long material specification life — the 1.8mm aluminum retainer and 2.0mm PVC cover are substantial enough to withstand years of continuous mechanical contact without structural failure
FAQQ: Why choose CG-50B over the adhesive CG-50A?
A: Choose CG-50B when the corner is exposed to continuous, high-frequency mechanical impact — main hospital corridors, busy school hallways, areas with constant wheelchair or cart traffic. The drilled aluminum retainer provides a structural fixing that resists impact loosening over years of use in ways adhesive bonding cannot guarantee in the highest-traffic locations. Choose CG-50A when installation speed, wall preservation, or lease restrictions make drilling undesirable, and traffic levels are light to moderate.
Q: What does ASTM E84 Class A mean for this product?
A: ASTM E84 is the standard test method for surface burning characteristics of building materials, widely referenced in North American fire codes. Class A is the highest performance classification within this standard, indicating the lowest flame spread and smoke development rating. This classification supports specification in projects requiring documented fire safety compliance for interior finish materials.
Q: Can CG-50B be installed alongside HR Series handrails and WG Series wall guards in the same project?
A: Yes. CG-50B is designed to be part of a complete coordinated wall protection system. With 100+ customizable colors available, CG-50B can be color-matched to HR Series handrails and WG Series wall guards specified in the same corridor, creating a visually consistent installation from a single supplier.
